Descrição:

HyperAmp® HA5801 series are 5.8 GHz version of Hyperlink's amplifiers for 802.11a wireless LANs. They are compatible with IEEE 802.11a OFDM radios as well as radios using Direct Sequence or Frequency Hopping Spread Spectrum modulation.

The HA5801 is a fixed gain amplifier with up to 500 mW or +27 dBm of output power. The gain is fixed at the factory at +10 dB. The maximum output power for 802.11a operation is 0.25 watts or +24 dBm. The receive gain compensates for cable losses and actually increases the receive sensitivity of most wireless LAN radios. This feature permits long cable runs with no degradation in operating range.

The HyperAmp® 5.8 GHz amplifier series features an all-metal weather-proof enclosure of die cast aluminum, making it suitable for demanding industrial and military applications. Outdoor models include a coaxial DC Power Injector and mast mounting hardware. The Power Injector provides DC power to the HyperAmp® through the coaxial cable, simplifying installation. Current-sensing circuits in the Injector provide remote amplifier diagnostic LEDs.

Power Supply

The power supply included with the amplifier is rated at 100-240 VAC @ 50/60 Hz allowing it to be used in the US as well as in the EU when used with the optional PSX-EU2 Plug converter (US NEMA 6-15R Flat Blades to EU 4/4.8 mm round pins). See Accessories Below for PSX-EU2 Plug Converter.

Note:
This Hyperlink bi-directional amplifier is designed for burst half-duplex operation. It is not intended for constant transmit or CW operation. Operation of the amplifier in CW mode will damage the amplifier and void the warranty.

Espeficicações: 

• IEEE 802.11a OFDM Compatible
• 10 dB Transmit and Receive Signal Gain
• Indoor Models
• Integral Lightning Protection
• All-Aluminum Construction
• Durable UV-Stable Finish
• Transmit and Receive LEDs
• Heavy Duty "N" Connectors
• International Power Supply
• Frequencia   5725 -5750 Mhz